Asterisk, and other worldly endeavours.

A blog by Leif Madsen

Building Queues with Asterisk


Wow it’s been a long time since I’ve update my blog. Well, lets do that! 🙂

I’ve just posted some documentation to the Asterisk issue tracker for review. It’s about building queues with Asterisk. It is the start of probably 2 or 3 sets of documentation on building queues with Asterisk that I’ll be submitting. You can find the documentation here for now:

https://issues.asterisk.org/view.php?id=16237

This documentation will likely be merged into core Asterisk at some point in the near future (doc/ subdirectory of your Asterisk source) and likely posted on http://blogs.asterisk.org as well.

Check it out, and let me know if you find any spelling errors, documentation errors, anything that isn’t clear, or errors in the examples. Of course suggestions for future documentation to be written would also be welcomed.

Thanks!

Advertisements

Written by Leif Madsen

2009/11/14 at 10:07 am

4 Responses

Subscribe to comments with RSS.

  1. Hi!

    Your blog has helped a lot, but I have one issue left with queues – the dynamic agents I have simply won’t change to “in use” like they used to with the old 1.4 system with static agents.

    Could you please please please point me in the right direction here? I have googled so much my eyes are bleeding 🙂

    Thanks,
    Mikael

    Mikael

    2009/11/17 at 7:59 am

    • I’m not really sure what to tell you, as this documentation I wrote was created on 1.6.2.0-rc6, so the configuration I used there should work fine for hints and device state; I’m using dynamic agents as well.

      Leif Madsen

      2009/11/17 at 8:05 am

  2. Arghl! Now I found out it was only call-limit in sip.conf for the respective friend that needed to be set!!

    Thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 😀

    Mikael

    2009/11/17 at 8:05 am


Comments are closed.

%d bloggers like this: